Make your own free website on Tripod.com

Angel Ornament Patterns

 

Eggy Angel Ornament

Here a great craft for us, thanks to Dora!!

Materials Needed

1 3" Panoramic Egg
15" Glitteredge ribbon
1 Ribbon Rose
9" Stretch Mesh
6" Glitter Cord
9" Wiredged Ribbon
9" 4mm Fused Pearls
1 Irridesent Ball
Wire

 

Instructions

1. Stretch mesh to cover egg completely from bottom to top. Gather mesh at top and wire. Trim excess mesh.

2. Cut stem from ball and glue to pointed top of egg. Glue 4" of pearls around ball for halo.

3. Using the wired ribbon make a bow with no tails and wire in the middle. Glue to the back of the angel for the wings.

4. Using the glitteredge ribbon make a 4 looop bow. Knot the ends of ribbon tails. Glue to neck of angel.

5. Fold remaining pearls in half and glue to centre of bow. Glue rose to center of pearls. Glue glitter cord to back for hanger.


 

Heavenly Angel

Materials

31" 6" Wirededged Tulle
15" glitteredge Ribbon
7" Glitteredge Cord
1 Irridesent Ball
10" 4mm Pearls
1 Ribbon Rose
Wire

Instructions

Cut tulle into one 19" piece and one 12" piece. Take the 19" piece and glue tulle ends together in a tube. Gather tulle 1/2" from top and wire securely. This forms the body. Take the 12" piece and glue together in a tube. Pinch together in the middle and wire to form the wings.

Glue wings to the back of 19" body. Cut stem from ball and gllue to top of angel's body. Use glitteredge ribbon to make a 4 loop bow and glue to front of angel. Cut and glue 4" of pearls around ball for halo. Fold remaining pearls in half and glue to centre of bow.

Glue rose to centre of pearls. Glue glitter cord to back for hanger. Knot ends of ribbon.  

 


 

Ribbon Cone Angel

Materials

33" Arabesque Ribbon
15" Glitteredge Ribbon
15" Glitter Cord
1 Ribbon Rose
9" 4mm Pearls
1 Irridesent Ball
Wire

Instructions

Cut arabesque ribbon into six 5 1/2" lengths. Trim the ends of each piece at an angle. Hold the ribbon with wrong side facing you and fold into a cone. Fold up to the points and glue together. Repeat for all three pieces.

Glue three cones together matching points. Glue a fourth cone half way into middle of centre cone of the three. Glue remaining two cones with open edges facing down, behind the three cones for the wings. Cut stem from ball and glue to centre of three cones for head.

Make a 4 loop bow from the glitteredge ribbon. Glue to neck of angel. Use 10" of glitter cord to make a shoelace bow. Glue to centre of bow.

Cut and glue 4" of pearls around ball for halo. Fold remaining pearls in half and glue to centre of bows. Glue rose to centre. Glue remaining glitter cord to back for hanger.